Folgende Internationale Normen und Sonderausführungen liefern wir:
Zoll-Schrauben, Zoll-Muttern, Studbolts für Flanschverbindungen
Hergestellt nach:
|
ANSI, AN, MS, NAS, ASME
|
Aus Werkstoffen:
|
AISI 316, 304 etc., SAE, ASTM A 193 B7, B8, B8M
|
|
ASTM A 194 2 H, etc.
|
Gewindearten:
|
UNC, UNF, UNEF, UNS, NPT/F, BSW; BSF, BA usw.
|
Unsere Stärke zu Ihrem Vorteil!
Ein breites und tiefes Lagersortiment im Bereich:
Innensechskantschrauben
Muttern
Gewindestifte
Sechskantschschrauben
Federringe
Scheiben
Gewindestangen
Verschlußschrauben
Zylinderschrauben
Paßschrauben
Schlitz / Kreuzschlitzschrauben
Linsenschrauben und Senkkopfschrauben mit Innensechskant
Sicherungsmuttern usw.
Ein Teil aus unserem Sortiment:
Slotted Fillister Head Screws To ANSI B18.6.3
|
Slotted Pan Head Screws To ANSI B18.6.3
|
Slotted Round Head Screws To ANSI B18.6.3
|
Slotted Countersunk Head Screws To ANSI B18.6.3
|
Slotted Mushroom Head Screws To ANSI B18.6.3
|
Phillips Pan Head Screws To ANSI B18.6.3
|
Phillips Countersunk Head Screws To ANSI B18.6.3
|
Philips Mushroom Head Screws To ANSI B18.6.3
|
Hexagon Head Setscrews To ANSI B18.6.3
|
Hexagon Head Setscrews To ANSI B18.2.1
|
Hexagon Head Bolts To ANSI B18.2.1
|
Socket Cap screw To ANSI B18.3
|
Low Head Socket Capscrews To ANSI B18.3
|
Socket Countersunk To ANSI B18.3
|
Socket Button Head To ANSI B18.3
|
Socket Setscrews To ANSI B18.3
|
Carriage Bolts To ANSI B18.5
|
Hex Nuts To ANSI B18.2.2 & B18.6.3
|
Nylon Insert Locking Nuts Regular & Thin Type (NM, NE, NTM & NTE)
|
Square, Wing & Dome Nuts
|
Flat Washers To ANSI B18.22.1
|
Lock Washers To ANSI B18.21.1
|
Raised Countersunk Slot & Phillips To ANSI B18.6.3
|
Anfrage an uns hier klicken...

...zum Kontaktformular!
|
|